This Week's Most Popular Stories About Upvc Replacement Door Handles

· 5 min read
This Week's Most Popular Stories About Upvc Replacement Door Handles

UPVC Replacement Door Handles

Over time the handles on your doors will get worn out and will require replacement. It is important to be able to match the dimensions of the old handles when replacing them.

The top screw's position as well as the lever and keyhole size are the three measurements you have to check. Use the size guide to assist you.

Inline Lever/Lever

A lever handle is a modern door handle designed to work with new or replacement doors. This kind of handle is available in various designs and finishes. A variety of manufacturers provide this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are constructed of durable materials and are suitable for doors with multi-point locks that require a strong design. The handles are inline and work with the same spindle as well as screw fixings, so they are easily installed on doors made of uPVC/Composite, either new or old.

The spring lever design allows the handle to be placed and angled for comfortable operation and is suitable for all users. The handle has been tested for endurance up to 200 000 cycles. This helps to ensure that the quality of finish and performance is maintained over time. The sprung lever can also be shortened to fit the widest range of locks. This is particularly beneficial in doors with smaller door frames in which the cylinder is further back. A lever that is shorter is an excellent option for doors that have latches that can be operated by a thumb turn inside.

Lever Pad

A Lever Pad upvc door handle operates differently than lever handles on doors. These handle types can either operate from a single spindle (inline) or independently from both sides using two offset or inline spindles (pad). They are usually used on UPVC doors with double glazing. They are available in a variety of finishes & variations.

The handles are available in a variety of finishes including White chrome and Gold.  Repair My Windows And Doors  is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high degree of durability and performance for its intended use.



All of the UPVC lever pad designs come with screws and a spindle which allow them to be fitted on a new or existing uPVC door. The backplate fixing centres of 211mm permit a bigger handle, which can often be a benefit when replacing a faulty or worn multi point door lock mechanism. These handle levers have a spring, which solves the issue of handles for doors that slide out of the horizontal position when they are not being used.

When selecting a replacement UPVC handle and spindle it is essential to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement may also be referred to as 'handle centres or cylinder centres'. It is important for matching the correct handles.

After you have identified the correct PZ size it is important to make sure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. These are usually round or square, with an internal lever, and an external push pad.

The majority of UPVC lever pads that we sell are sprung, meaning that they will return to their horizontal position when not being used, instead of hanging out and possibly securing in the frame. This helps prevent the draughts and cold air from entering a home. Also, the majority of the UPVC lever pad handles are swivel which allows you to place them on either side of the door.

Euro Cylinder

Cylinder locks are found on uPVC and other types of doors. They work by using a key that unlock a cylinder case which then reveals pins which can be aligned with the pins in the lock body and allowing them to turn the cam, thereby opening the door. Euro cylinders can be fitted with up to six pins with both internal and external doors usually requiring different levels of security.

Choosing the right cylinder is vitally important; this depends on the way your door and handle are utilized. External doors, for example, should be fitted with higher security cylinders while doors inside can be secured with an ordinary cylinder. Certain cylinders come with extra features that can improve security, such as anti drill or anti bump properties.

A euro cylinder should be measured accurately to ensure it is the correct size for your door. The cylinder should be measured from the hole for fixing screws in the middle to each end of the cylinder, including the thumb turn if you have one. It is best to do this with the lock in place however if this is not possible, you can remove it to take measurements. It is crucial to not have a extension of the cylinder beyond the handle or escutcheon. This can make it vulnerable to snapping lock attacks.

The design of most newer cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce the chance of a attack by causing the cylinder to rotate in the opposite direction. This helps deflect the attack and ensure your doors are secure.

Certain cylinders are constructed to resist snapping. This is a typical attack on cylinders. A special tool is used to break the lock's break line and then the front of the cylinder is snapped off. This is a much faster and more convenient method of gaining access than through a multipoint locking system. It also leaves no evidence of the break-in which can hinder insurance claims.

Spring Cassette

The spring cassette is located in the base of your door handle's backplate, providing a spring solution to return the multipoint lock handles back to their original position after usage. The handles had no spring, and would slide when the locking mechanism was disconnected. This simple part is the best way to address this issue. It also prevents your upvc door from becoming stuck in the closed or open position, as they are difficult to close manually.

These spring cassettes were designed to be used with a spring multipoint lock. They will not fit unsprung handles, and you will have to cut a hole in your backplate in order for them to fit. (Please check the image for a technical diagram). These cassettes are a solution to damaged or missing cassettes that are in the backplate of uPVC door handles. They are supplied in one unit. They come with a square cut out that can accommodate an 8mm shaft.

These spring cassettes are an excellent cost-effective way to fix the problem of door handles that are sliding. They are simple to install and can extend the lifespan of your uPVC door. For more information about our range of uPVC accessories and spares, please feel free to get in touch with our team. We are always happy to offer expert advice and to assist you.